Large Quadcopter Build

Large Quadcopter Build

    ›Appendices

    Build

    • Introduction
    • Parts
    • Purchase Order
    • Batteries
    • Transmitter - Getting Started
    • Stick setup
    • Transmitter - Model Setup
    • Transmitter - Flight Modes
    • Receiver
    • Assembling the electronics
    • Binding the receiver
    • Pixhawk setup
    • F450 frame kit
    • Soldering the PDB
    • Frame assembly
    • Final assembly
    • Final assembly
    • Final setup

    Appendices

    • Pixhawk LEDs
    • Pixhawk tones
    • Pixhawk Windows device driver
    • Transmitter extras
    • Soldering
    • Stores
    • Windows VM
    • OpenTX Companion on Ubuntu
    • QGroundControl
    • Notes

    FPV quad

    • Eachine QX95
    • Inprogress QX95
    • Cleanflight Settings README
    • X-racer notes

    Followup projects

    • Video
    • Telemetry

    Miscellaneous

    • Snippets
    • Antenna mount
    • Antenna mount - version 1
    • Antenna mount - version 2
    • F450 dimensions
    • GPS mast placement
    • Notes to self
    • Pages and videos
    • Power module - XT60 To Deans
    • Receiver power
    • Receiver Windows upgrade
    • Inside the RX8R
    • Unused parts
    • Vibration damping
    • OpenTX sounds
    • Flight mode sounds
    • Case
    • Foam Outline README
    • 20181021 Rebuild Params README
    Edit

    Pixhawk LEDs

    The 3DR site used to maintain information on the LEDs on the Pixhawk - however gradually all their Pixhawk information is disappearing and the images included below are no longer available from there.

    These versions of the pictures were downloaded from Kopterforum.at (which requires registration before you can see images posted to its forums).

    The images here cover:

    • The main LED seen at the center of the Pixhawk itself.
    • The red LED in the safety switch.

    For more details on the various other LEDs see the status LEDs page on pixhawk.org.

    The main Pixhawk LED.
    main LED

    The safety switch LED.
    safety switch

    TODO: see also https://docs.px4.io/en/flying/led_meanings.html

    Last updated on 1/16/2019
    ← Final setupPixhawk tones →